top of page

Why Use TermoRens?

100% 

BIODEGRADABLE

SAFETY  

SAFE AND EASY APPLICATION​​

MINIMIZING ENVIRONMENTAL IMPACT

SAFETY MEANS QUALITY

100% ENVIRONMENTAL AND SAFETY FOCUS

TermoRens products are Environmentally ECO Friendly -  100% Biodegradable and FREE of toxins!

​

  • Zero Discharge - It dissolves completely in water.

  • Safer and Cleaner - No collecting and deposing of hazardous waste.

  • Zero Environmental Impact - It can be directly discharged into the sea and ground without harming the environment.

  • Minimal Risk and Safe Handling - No danger for health risks related to high noise, and lower risks for vibration injuries due to grinding and blasting.

  • No harm or Destruction on Materials - Such as plastic, polyester, rubber, metals, glass flake, sleeves or gaskets, and paints.

  • High performance, Cost Efficient and Competitive -Compared to traditional cleaning methods.

A 100% Biodegradable Environmentally friendly Green Product with NO TOXINS and 100% HSSE benefits!

​

  • Certified & approved for use in drinking water systems

  • Both Environmentally friendly and highly effective

  • No harm for the environment

 

Safer, cleaner and easier to use equipment than traditionally with UHP Water Jetting, Grinding, Needle-gun and Sandblasting;

​

  • Sprays on like paint with normal HP paint spray or paint pump equipment

  • No danger for health risks related to high noise, and lower risks for vibration injuries

  • No time spent on removal of sand;

  • No issues with sand entering into the equipment & components, etc..

  • No collecting & disposal of hazardous waste

 

Important Gains -- Time and Cost savings, Lower Risks and Operational benefits:

​

  • Less Manual work & reduced production downtime

  • No environmental Impact

TermoRens-Gel

​

  • Normal High Pressure (HP) Paint Pump for the application of GEL to thickness 400μm-500μm WFT (Wet Film Thickness);  Hoses have to be clean and free of paint and thinner.

  • Spray gun with nozzle 23-32/60 recommended, and important to maintain the correct thickness of 400μm-500μm WTF

  • Smaller areas can be applied with a brush, but it’s still important to maintain the correct thickness of 400μm-500μm WTF

  • To be removed by normal High Pressure (HP) Water Cleaner 300-500bar with rotating nozzle and cold water for best result.

 

TermoRens-Liquid

​

  • Mixing the concentrate TermoRens Liquid with 75% water as recommended for internal process cleaning  or immersion type; soak the components in bucket / dip-tray or a cleaning tank.

bottom of page